Loading ...
spinning equipment factors(passive) caused byyarn defects
errors in the sliverleadto yarn defects
air flow and other methods of opening and removing impurities(passive) caused bythe yarn defects
machinery and blowing air(passive) caused bya yarn defect
lifting of front edge of cradle due to defective cradle spring(passive) caused bythe yarn defects
species and the reasons Since the fiber of poor electrical conductivity , temperature and humidity on the more sensitive , if not managed well , prone to sticky ( sliver or roving adhesion to each other ) , wrapped ( wrapped around the roller and the roller surface flowers(passive) caused byyarn faults
hanging travellers a(passive) caused byHairpin yarn defects
mass variations(passive) created byyarn faults
this reason(passive) caused byyarn defects
to attach flying flowers to the yarncausingyarn defects
5 , anti - cleaning work defects : to hand to , eyes , and resolutely implement the cleaning method , is strictly prohibited flying into the yarnresultingin yarn defects
disruptions in the subsequent process stages , which affect production and qualitycausedisruptions in the subsequent process stages , which affect production and quality
excessive breakage(passive) caused byexcessive breakage
yarn faults up to 10 m in length with a positive or negative yarn diameter deviationcauseyarn faults up to 10 m in length with a positive or negative yarn diameter deviation
interruption ofcausinginterruption of
not only to yarn breaks but also to fluctuations of yarn thickness or other irregularitiesleadnot only to yarn breaks but also to fluctuations of yarn thickness or other irregularities
to a cut performed by the cleanerleadto a cut performed by the cleaner
yarn breakage and small defects which are not large enough to cause yarn breakage can be detected promptly and accuratelycausingyarn breakage and small defects which are not large enough to cause yarn breakage can be detected promptly and accurately
during the spinning processcreatedduring the spinning process
to a moire effectwould leadto a moire effect
man - made factors(passive) caused byman - made factors