Loading ...
too little materialcan causevoids in the part
drought - like conditionscan ... causevoids to form
The binder loses volume in the processcausingvoids to form
Other causes , such as thermal stressesmay causevoids to form
The electromigration effectcausesvoids to form
upon removal of the tarmac road surfacing(passive) were discoveredVoids in the ground
the fill ... to disintegratecausingvoids to form
Watercausespitting in the soundless void
soilcausesvoids beneath the slabs
obstructionsmay causeincomplete filling of the voids
a nice smooth bit of acryliccan paintonto any voids
a separationcausingvoids to appear
for example(passive) can be causedVoids in the underfill
a period of timecausingvoids in the cavity
all fixtures or equipmentwould causevoids in the fill
as previously mentionedcan causevoids ( void
which act thenresultsin filling the Void.
a fragilityleadsinexorably ... to the void
Another culpritcausesvoids in castings
deteriorate over timecausingvoids in the subgrade
a channel worldcomposedpurely of the void
by shrinkage or the presence of gas or air(passive) caused byvoids
by air bubbles being trapped in the resin mold during the casting process(passive) are caused byvoids
to form on the surface of the insulating layer within the via openingscausingvoids
coal extraction that took place at the depth between 7 and 13 m , as well as the dissolution cavities that exist within the underlying dolomite formation at the depth of about 50 m below the surface(passive) caused bysubsurface voids
specifically the tendency of the liberated water vaporto causevoids during molding
by erosion , loss of volume due to moisture loss(passive) caused byVoids
Water erosion beneath slabscan causevoids
gas pockets formed during solidification(passive) can be caused byVoids
by the shrinkage of material(passive) caused byvoids
by entrapped gas or air during injection(passive) caused byvoids
by the shrinkage of material during polymerization(passive) caused byvoids
soil settlement(passive) caused byvoids
This trapped aircan causevoids
the filler materialcausingvoids
by trapped gas(passive) caused byvoids
by the solder process(passive) have been caused byvoids
by the solder process(passive) have been causedvoids
Gas expansioncausedvoids
by unwanted gas bubbles(passive) caused byvoids
in mitigating ASR damage by providing relief through ASR gel migrating into the LWA void structure , thus reducing swelling pressurehave contributedin mitigating ASR damage by providing relief through ASR gel migrating into the LWA void structure , thus reducing swelling pressure
in mitigating ASR damage by providing relief through ASR gelhave contributedin mitigating ASR damage by providing relief through ASR gel
settlement of roadway and plug sewercan causesettlement of roadway and plug sewer
to easy cave formation along themleadingto easy cave formation along them
joint failurewill ... causejoint failure
while using them _discoveredwhile using them _
the floor slab to failcausedthe floor slab to fail
from ongoing quarrying operations at the siteresultingfrom ongoing quarrying operations at the site
in a higher thermal resistancecan resultin a higher thermal resistance
eventuallywill ... causeeventually
to a large void just below the surface mortarleadingto a large void just below the surface mortar
in sinking of the paversresultin sinking of the pavers
to early completion failuremay leadto early completion failure
in roof failurecan resultin roof failure
to cracking after a year in serviceledto cracking after a year in service
in roof covering failurecan resultin roof covering failure
to roofcan leadto roof
to increased circuit resistance and open circuitscan leadto increased circuit resistance and open circuits
to mid - flight directional changescontributeto mid - flight directional changes
the settlementcausingthe settlement
Partial discharges in insulating material(passive) are caused byPartial discharges in insulating material
over heatingwill causeover heating
in crack propagationresultedin crack propagation
in loss of finescould resultin loss of fines
leakscausingleaks
metal failurecausemetal failure
dry pocketscan causedry pockets
dry pockets in the fiberglass being laid over itcan causedry pockets in the fiberglass being laid over it
dead spotscan causedead spots
the ground to collapsecan causethe ground to collapse
in blistersmay resultin blisters
in foundation settlement and sinkingcan resultin foundation settlement and sinking
to foundation settlement and sinkingwill leadto foundation settlement and sinking
to foundation settlement and sinkingcan leadto foundation settlement and sinking
to movement and a failurewill leadto movement and a failure
in crack formation and fracturemay resultin crack formation and fracture
in device failurecould resultin device failure
to foundation settlementleadto foundation settlement
to foundation settlement or shiftingcan leadto foundation settlement or shifting
in excessive rear differential movement less than loadresultsin excessive rear differential movement less than load