Loading ...
In all circumstances and conditions , the junction temperature must be held below 150˚Cto preventactivating the LM4894 ’s thermal shutdown protection
A / C system problemscauseprotection devices ( pressure , thermal , and electronic ... to interrupt system operation
Failure to do somay resultin the device going into thermal protection shutdown
significant heat ... require coolingto preventthermal shut down of the device during operation
to prevent over temperature operating from damage while current limit protection is against over current operating of the output Switch(passive) is designedThermal shutdown protection
to protect the RT9187A in the event of fault conditions(passive) is designedThermal - shutdown protection
thermal calucations are wrongcausingthermal shutdown for protection
It is preferably usedto triggerexternally located thermal protection devices
Resultant impedances in the earth return path between the load and the origin of the supplymay preventthe operation of overcurrent protection devices
the formation of neutral gas thermosiphons within the annular space formed between a reactor vessel wall and the shell of a top closure structure from which the vessel wall is suspendedpreventsthe formation of neutral gas thermosiphons within the annular space formed between a reactor vessel wall and the shell of a top closure structure from which the vessel wall is suspended
to protect electrical equipment from catching fire by sensing overheating , and cutting off the electrical circuit immediatelydesignedto protect electrical equipment from catching fire by sensing overheating , and cutting off the electrical circuit immediately
to sense overload conditions & interrupt the flow of currentdesignedto sense overload conditions & interrupt the flow of current
damage to the controller due to the heat generated in the controllerto preventdamage to the controller due to the heat generated in the controller
overheat damage to the deviceto preventoverheat damage to the device
thermal damagepreventsthermal damage
damage to the switch controller controlling the switch operation of the power switchto preventdamage to the switch controller controlling the switch operation of the power switch
to prevent the overheating of motors and transformers in domestic appliances and commercial equipmentdesignedto prevent the overheating of motors and transformers in domestic appliances and commercial equipment