Loading ...
the highest ISS ... to slowsettingtack coats
TCpreventstack coats
to form a strong bond between the two layers of asphalt by preventing the slippage of the two layers(passive) are designedTack coats
of polymer modifier and hard base asphalt(passive) is composedTrackless tack coat
Lightly spray ball with an even coat of brown spray paintcreatinga tack coat
Spray with one light coat of paintto createa tack coat
spraying the first coat lightto createa tack coat
spray 1 coat very lightlyto createa “ tack ” coat
Nanotac , a Zydex innovation , chemically bonds , and ensures 100 per cent waterproofing and stress transferring abilities for tracklessquick settack coat
that is rapidsettingtack coat
The primary benefit isto createa “ tack ” coat
emulsified asphaltdesignedto Tack Coat
emulsions ... before driving on themto setemulsions ... before driving on them
emulsions ) or cure ( cutbacks ... before driving on themto setemulsions ) or cure ( cutbacks ... before driving on them
the penetra - tion of surface water into the subgradepreventsthe penetra - tion of surface water into the subgrade
emulsions ... or TO YOUR LOCATION AND THE UNIQUE REQUIREMENTS AND QUANTITIES FOR YOUR Statement of Work and Technical Applyto setemulsions ... or TO YOUR LOCATION AND THE UNIQUE REQUIREMENTS AND QUANTITIES FOR YOUR Statement of Work and Technical Apply
03/03/2018to set03/03/2018
to withstand these shear stressesdesignedto withstand these shear stresses
up and get sticky then a second layer is put onsetup and get sticky then a second layer is put on
to lay 100grammes-1kg / m2 when moving at around 3.5 km/hdesignedto lay 100grammes-1kg / m2 when moving at around 3.5 km/h
an adhesive bond between layers of asphaltcreatesan adhesive bond between layers of asphalt
as a pre - treatment for use on concrete and tarmac surfacesdesignedas a pre - treatment for use on concrete and tarmac surfaces
to placing the asphalt overlayto set priorto placing the asphalt overlay
to stabilise existing surfaces and improve the bond strength of subsequent resinsdesignedto stabilise existing surfaces and improve the bond strength of subsequent resins
adhesion between the existing HMA and the new overlayto createadhesion between the existing HMA and the new overlay
so that it is not sticky the haul truck as well as by the tires or tracks of the paverto ... setso that it is not sticky the haul truck as well as by the tires or tracks of the paver
of non - tracking asphalt binder meeting the requirements of Table 1 or Table 2composedof non - tracking asphalt binder meeting the requirements of Table 1 or Table 2
the clear from flowing because you applied a rough foundation for the second coatwill preventthe clear from flowing because you applied a rough foundation for the second coat
under normal conditionssettingunder normal conditions
using hydrocarbonscreatedusing hydrocarbons