Loading ...

Blob

Smart Reasoning:

C&E

See more*

Qaagi - Book of Why

Causes

Effects

on the factory(passive) is designedScrub radius

when aftermarket wheels showcasing another offset from inventory are installed , which moves the tire(passive) is influencedScrub radius

using spacers on the stub axle(passive) is setScrub radius

increasing the contact patch area(passive) caused byscrub radius

into the knuckle and spindle(passive) is designedThe scrub radius

at 5/8(passive) is setScrub radius

your choice of wheels ' backspacing & width and tires ' diameter(passive) is set byScrub radius

the difference between the two lineswill createthe Scrub Radius

camber , kingpin angle , and wheel offset of the wheel rim(passive) is influenced byThe scrub radius

on the manufacturing facility(passive) is designedScrub radius

the kingpin inclinationcreatesthe scrub radius

Modern wide flat tyres will inevitably tramline on uneven surfaces as the centre of the contact patch moves sideways ,causingthe scrub radius

very carefully(passive) has been ... designedScrub radius

Both of these factorswill createa SCRUB RADIUS

a automobile which is pulling Although the alignment is suitable ... somethingwill influencescrub radius

Castor angle as well ascausesscrub radius

when aftermarket wheels featuring another offset from inventory are put in , which moves the tire(passive) is influencedScrub radius

too muchdesignedin scrub radius

as the positive scrubis setas the positive scrub

increased kickbackcausingincreased kickback

substantially to the amount of energy that you are applying to the tirecan ... contributesubstantially to the amount of energy that you are applying to the tire

the obtained curvaturewill influencethe obtained curvature

greater steering effortcausesgreater steering effort

a drag on the wheel during straight ahead driving , causing the wheel to toe - out or toe - in and pivot on the steering axis 14can createa drag on the wheel during straight ahead driving , causing the wheel to toe - out or toe - in and pivot on the steering axis 14

the force(passive) created bythe force

up differentlyis setup differently

some truly awful steering problems if you go too far in the positive or negative directioncan causesome truly awful steering problems if you go too far in the positive or negative direction

tramliningwill causetramlining

to poor handling and reduced braking under some conditionswill leadto poor handling and reduced braking under some conditions

toe in or toe out on cornering depending on whether you move the centerline out or inwill causetoe in or toe out on cornering depending on whether you move the centerline out or in

Blob

Smart Reasoning:

C&E

See more*