Loading ...
The cam ... both lobesare setat a 116-degree lobe - separation angle
he continues(passive) are influencedLobe separation angles
a Comp Cams CB-280AH-14 hydraulic tappet camshaft ... specs out at 232 and 237 degrees duration at 0.050-inch lift with valve lift at 0.547-inch intake and exhaustseton a 114-degree lobe separation
These differencesresultin a change to the lobe separation angle
Recirculated Beam Recirculated Beam RF Separator RF separatorcreatessmall separation angle
intake / .623-inch exhaustseton a lobe separation angle of 113
Backhands - The backhand unit turn is importantto createseparation angle
trial and error on the dynocan leadto an ideal lobe separation angle
when the cam is ground and can not be changed(passive) is setThe lobe separation
Functional loss of the fibrilscausesepidermal separation
a flatter torque curvecreatesa flatter torque curve
in broader torqueresultin broader torque
to blend outstanding overall performance with acceptable driving mannersdesignedto blend outstanding overall performance with acceptable driving manners
too much overlap and lack of vacuumis creatingtoo much overlap and lack of vacuum
idle and manifold vacuumgreatly influencesidle and manifold vacuum
the engine to bleed off cylinder pressure in the low RPM due to the increased overlap of the open ramps of the intake and exhaust valvescausesthe engine to bleed off cylinder pressure in the low RPM due to the increased overlap of the open ramps of the intake and exhaust valves
the intake valve to close soonercausesthe intake valve to close sooner
all the subtle interrelated effects(passive) created byall the subtle interrelated effects
engine performanceto influenceengine performance
engine vacuum , which is important if you are using power brakes and an automatic transmissionalso createsengine vacuum , which is important if you are using power brakes and an automatic transmission