Loading ...
not sureis causinghigh idle issue
to approx(passive) should be setIdle speed ( in PARK / NEUTRAL
the old onecausinghigh idle at 1500rpm
and then my engine slip and TCS lights come onresultingin a very rough idle in Park
aftermarket IAC valve(passive) is usually caused byHigh idle at start
the timingbe setat 0 ° BTDC at idle in PARK
a soft code for the " Park Validation Switchpreventedhigh - idle in the cold
2005 10:22 Coolant Temp SensorcausesHigh Idle RENIX
Hello :settingat idle in park
20:51 Coolant Temp SensorcausesHigh Idle RENIX
the problemcausesthe problem
hunting at idle onlymay causehunting at idle only
racing , low idle as the pin contacts connect and disconnect at willcould ... causeracing , low idle as the pin contacts connect and disconnect at will
higher line pressurecreateshigher line pressure
Test and record RPMsettingTest and record RPM
the incoming air to rush against the choke plate and force it open slightly to lean the mixturewill causethe incoming air to rush against the choke plate and force it open slightly to lean the mixture
either lo speed screwseteither lo speed screw
High Idle Speed = engine speed at the time the load switch closessettingHigh Idle Speed = engine speed at the time the load switch closes