Loading ...
with the wrong gluecan leadviolinsto creep
thermal cycling of the regolith ( soil(passive) caused bydownhil creep
the forces ... , as well as the effect of creepcausecreep
Creep Limit - The maximum stresswill resultin creep
by stress and temperature(passive) caused byCreep
by the creep strain(passive) Caused bycreep
some stress loads ... requiredto causeby creep
by the wastegate not being able to flow enough to control boost(passive) was caused bycreep
Stress and high temperaturescausedcreep
Stress and high temperaturescausedcreep
This results in the longitudinal movement of the rail in the direction of trafficthereby causingcreep
The maximum stresswill resultin creep
the high bending stresswill causecreep
the rock mass strength ... a critical levelto causecreep
the operational stress states which are likelyto causecreep
by thermal stresses(passive) caused bycreep
the rock mass strength ... is sufficient up to a critical levelto causecreep
creep ... which are knownto cause' creep
low fluidcan causea creep
This stresscausescreep
no stressto causecreep
the stresscausingcreep
the stress statecausescreep
the rail to move in the direction of trafficresultingin creep
the time an instrument need to adapt to change in aplied input(passive) is caused byCreep
a constant forceto causecreep ,
Changesresultingfrom creep
A stress that is applied and then sustainedwill causecreep
the scope enoughto causecreep
pressurecan influencecreep
exposed to high temperature conditions enoughto causecreep
repeated pipe movement(passive) caused bycreep
The factorsinfluencecreep
the factorsinfluencingcreep
also(passive) can ... be causedCreep
also(passive) is ... influencedCreep
also(passive) is ... resultedCreep
by the contact pressure(passive) caused bycreep
failureresultingfrom creep
by the water(passive) caused bycreep
many problems forcan causemany problems for
in Tromavillesetin Tromaville
in stressto causein stress
to the disasterledto the disaster
in a shortened reserve power timeresultsin a shortened reserve power time
thusmay ... resultthus
in a shortened reserve powerresultsin a shortened reserve power
to slow permanent deformation of a materialleadsto slow permanent deformation of a material
stress within the structurecan causestress within the structure
it projects to not only be late but also over - budgetcausesit projects to not only be late but also over - budget
creep and pressure relaxation(passive) caused bycreep and pressure relaxation
the damage(passive) caused bythe damage
to a loss of sufficient sealing stressleadto a loss of sufficient sealing stress
to deformation of the materialleadsto deformation of the material
wear damage(passive) caused bywear damage
Stress relaxation(passive) is caused byStress relaxation
to permanent deformation and possibly malfunctionleadingto permanent deformation and possibly malfunction
stresses to relax with timecausesstresses to relax with time
materials to fail at a stresscan causematerials to fail at a stress
the failure mechanismleadthe failure mechanism
problemscan causeproblems
problemscausingproblems
failuremay ... causefailure
the metal to stretch over timecausesthe metal to stretch over time
injurycausesinjury
collapse due to long - time instabilitymay causecollapse due to long - time instability
a deterioration in the sealing after some timecould causea deterioration in the sealing after some time
a deterioration of the sealing over timecan causea deterioration of the sealing over time
strains in the direction of the stresswill causestrains in the direction of the stress
in schedule delaysresultin schedule delays
materials to fail at a stress well below there tensile strengthcan causematerials to fail at a stress well below there tensile strength
wear ... ring fracture and excessive vibrationcan causewear ... ring fracture and excessive vibration
deformation(passive) caused bydeformation
failure of the distribution transformerscausesfailure of the distribution transformers
wood deformations evolving in timecauseswood deformations evolving in time
to FATIGUE , which will ultimately lead to pipe failurecan leadto FATIGUE , which will ultimately lead to pipe failure
strength degradation(passive) caused bystrength degradation
problems between he and his wifecausesproblems between he and his wife
in the bunching of rail at a particular locationresultsin the bunching of rail at a particular location
to change orders , project delays and decreased project satisfactionleadsto change orders , project delays and decreased project satisfaction