imperativethat a suitably profiled comb slot achieve the desired axial rotation of conductors dependably and without any risk of mechanical interference between the comb slot and the movement of conductors therethroughcould causeconductor breakage
vibration lab ( 40 m span ) vibration in transmission line conductors are knownto causebreakage of conductors
4,334,351 discloses extruding a second polymeric PTC material having great flexibility over an underlying PTC composition which is relatively rigid in order to prevent damage to the heating body from flexing , andpreventconductor breakage
Pulled or stretched cablescan resultin conductor breakage
scratches and kinksmay causebreakage of conductors
exceeding a cable 's minimum bend radius ( like bending the cable at a sharp 90 + degree angle where it exits the connector(passive) is usually caused byConductor breakage
If cables and hoses are placed in a carrier randomly , they will almost surely interfere with one another ,eventually causingconductor breakage
The soft dielectric can give and compress and accommodate differential movement between the metal of the conductor and the semiconductor material of the substratethereby preventingbreakage of the conductors
If the wire will be subject to repeated flexing , a stranded wire should be usedto preventconductor breakage
accidental unlocking of the strain relief and eliminates cable rotationleadsto conductor breakage
motioncausesconductor breakage
a manufacturing method for a highly reliable power semiconductor devicepreventsbreakage of an conductor
relative rotation of the componentscan leadto conductor breakage
Moreover , the transverse orientation of the strain relief bar relative to the conductor may tendto causebreakage of the conductor
Insulated ferrulespreventconductor breakage
in signal degradationresultsin signal degradation
open connection and conductor shorting causing short connectioncausingopen connection and conductor shorting causing short connection
in very costly repairsresultingin very costly repairs
to system failurecould leadto system failure
voltage stresses(passive) caused byvoltage stresses
the like(passive) caused bythe like
when holding lines with abrasive hooksoften causedwhen holding lines with abrasive hooks
the motor I38 into operationsettingthe motor I38 into operation
in the ICD exchange cohort , which was not different from the control group ( 19.2 %leadsin the ICD exchange cohort , which was not different from the control group ( 19.2 %
with the needs of conductors in mindDesignedwith the needs of conductors in mind